white power mac g3
Newer MAXpowr G3 1.0
This installer will install Mac OS X MAXpowr driver software for MAXpowr G3 (for PCI based machines) and MAXpowr more>>
This installer will install Mac OS X MAXpowr driver software for MAXpowr G3 (for PCI based machines) and MAXpowr G3-G3.
Umax MagicScan 4.x Updater for PowerMac G3 1.0
Available in this download is the latest update for the MagicScan scanner software from Umax. This latest update allows you to run your MagicScan software on any new blue and white G3 more>>
Available in this download is the latest update for the MagicScan scanner software from Umax. This latest update allows you to run your MagicScan software on any new blue and white G3 PowerMac.
NEC-Mitsubishi Monitor Power patch 1.0.1
NEC-Mitsubishi has identified a compatibility issue between some models of display monitors and some Apple Macintosh G4 computers that causes the display monitor to remain off after a restart or more>>
NEC-Mitsubishi has identified a compatibility issue between some models of display monitors and some Apple Macintosh G4 computers that causes the display monitor to remain off after a restart or powering up after shutdown. On certain versions of the Mac OS ROM, this will only occur if the G4 has been in sleep mode. NEC-Mitsubishi has identified the cause as an incompatibility in the Mac G4s with OS 9.0.4 and Mac OS ROMs versions 4.9.1, 5.2.1 and 5.5.1, and Mac OS 9.1 Upgrade with Mac OS ROM 6.1. This causes "power off" commands to be sent to the monitor on shutdown and restart, however no matching "power on" command is sent instructing the monitor to wake up as the Mac powers up. The problem only appears on certain monitors because they support an optional industry standard alternate power command system that has been introduced on the new G4s. It is important to note that the monitor is functioning normally and is just following commands sent from the Mac. The following Mitsubishi monitors are affected by this issue:
- Diamond Pro 2045
- Diamond Plus 120
- Diamond Plus 200
- Diamond Plus 220
- Diamond Plus 730
- Diamond Pro 720
- Diamond Plus 710s
- Diamond Pro 920
- Diamond Plus 91
- Diamond Plus 92
HP Ethernet with LAN remote power adapter 4.38.0.0
HP Ethernet with LAN remote power more>> HP Ethernet with LAN remote power adapter<<less
Power Mac G4 ROM Update 1.0 (10/18/1999)
During testing, Apple has discovered a potential problem that may cause data corruption or system crashes in certain situations on Power Mac G4 (PCI Graphics) systems more>>
During testing, Apple has discovered a potential problem that may cause data corruption or system crashes in certain situations on Power Mac G4 (PCI Graphics) systems. The Power Mac G4 ROM 1.8.1 Update includes fixes for data or file corruption that may occur after a Photoshop crash with Virtual Memory on and Extensis Photo Tools installed. For more about this software, check out the readme file.
Apple DVD Player 3.0.1
DVD Player update delivers improved performance and stability, as well as support for Blue and White Power Mac G3 and Power Mac G4 systems with PCI-based more>>
DVD Player update delivers improved performance and stability, as well as support for Blue and White Power Mac G3 and Power Mac G4 systems with PCI-based graphics.
SMC2532W-B High Power Wireless Adapter 3.1.3.0
SMC2532W-B High Power Wireless Adapter: The SMC2532W-B 2.4GHz 802.11b High Power Wireless PC Card provides 802.11b connectivity with up to 200 milliWatts (mW) of transmit power nearly four times the more>> SMC2532W-B High Power Wireless Adapter: The SMC2532W-B 2.4GHz 802.11b High Power Wireless PC Card provides 802.11b connectivity with up to 200 milliWatts (mW) of transmit power nearly four times the power of standard PC Cards and excellent receive sensitivity. With an operating range up to 2,700 feet, nearly three times greater than standard 802.11b wireless clients, the SMC2532W-B overcomes indoor multipath distortion to deliver dramatic improvements in networking quality and throughput.<<less
Stealth Serial Port X 1.4
The main benefit of the Stealth Serial Port is that it provides a native serial port that behaves just as if it was built-in the G4 or G3 system more>>
The main benefit of the Stealth Serial Port is that it provides a "native" serial port that behaves just as if it was built-in the G4 or G3 system. With OS X, the Stealth provides that same level of compatibility - if it works with built-in serial port on a Beige G3 running Mac OS X then it will work with a Stealth.
Note - Apple has stated that LocalTalk will not be supported in OS X, so LocalTalk printers will not work with the Stealth under OS X (and under Classic). Also, your serial peripheral may require its own OS X drivers to work under OS X - please check with the vendor of your serial device. This update is not required for Mac OS 9.x users.
ALi 7101 Power Management Controller 1997-04-21
This driver release supports the following devices: ALi 7101 Power Management more>> This driver release supports the following devices:
- ALi 7101 Power Management Controller
This driver release supports the following devices: ALi 7101 Power Management. ALi 7101 Power ...This driver release supports the following devices: ALiSiS Power Management Controller 1999-01-26
This driver release supports the following devices: SiS Power Management more>> This driver release supports the following devices:
- SiS Power Management Controller
following devices: SiS Power Management. SiS Power Management Controller 1998-01-09 - Tyan ...This driver release supports the following devices: SiSRtx PnP and Power Management Device 6.1.0.0
Rtx PnP and Power Management more>> Rtx PnP and Power Management Device<<less
MP3 Player Power Control Driver 1.0.7.1
This driver release supports the following devices: MP3 Player Power Control more>> This driver release supports the following devices:
- MP3 Player Power Control Driver
[Hercules Power Drive] Terminator 128/3D GLH (v 1.09.26103) 1998-06-11
This driver supports the following devices: [Hercules Power Drive] Terminator 128/3D GLH (v more>>
This driver supports the following devices:
- [Hercules Power Drive] Terminator 128/3D GLH (v 1.09.26103)
This driver release supports the following devices: [Hercules Power Drive] Terminator 128/3 ...This driver release supports the followingApple Mac OS Update 9.2.2
This is the latest Mac OS update from Apple that improves Classic application compatibility in Mac OS X and delivers updated support for Macintosh systems that are based on the PowerPC G3 or G4 more>>
This is the latest Mac OS update from Apple that improves Classic application compatibility in Mac OS X and delivers updated support for Macintosh systems that are based on the PowerPC G3 or G4 processor.
with Mac OS 9. It provides additional FireWire and USB support, enhances networking and power ... with the Palm desktop and prevents HotSyncing between your Palm organizer and desktop Mac. ForThis release corrects a variety of problems that have emerged since the initial release of Mac ... should not install this update: Macintosh Performa 4400 or a Power Macintosh 4400, 5500, 6500Canon ScanGear CS 7.1.3.3
This ScanGear CS Scanner Driver is compatible with existing iMac, G3,G4 & Apples latest G5 systems equipped with built-in USB 1.1 or 2.0 ports more>>
This ScanGear CS Scanner Driver is compatible with existing iMac, G3,G4 & Apple's latest G5 systems equipped with built-in USB 1.1 or 2.0 ports. The ScanGear CS v7.1.3.3 Scanner Driver is for the CanoScan LiDE 50 scanner running on Mac OS 9.0 or higher and Mac OS X "Classic Mode". This self-mounting scanner driver installer assists the user with a guided installation procedure through an intuitive interface.
