revision
LNE100TX Fast Ethernet Adapter Version 1.0 4.56.16.0
LNE100TX Fast Ethernet Adapter Version 1.0:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card more>> LNE100TX Fast Ethernet Adapter Version 1.0:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.<<less
ITE IT8212 ATA RAID Controller 1.7.2.0
ITE IT8212 ATA RAID Controller : The IDE RAID controller, which is compatible with the ATA/ATAPl-6 specification and supports the IDE RAID 0/1/0+1 function, acts as an interface between the system more>> ITE IT8212 ATA RAID Controller : The IDE RAID controller, which is compatible with the ATA/ATAPl-6 specification and supports the IDE RAID 0/1/0+1 function, acts as an interface between the system and the IDE device. It supports not only a Scatter/Gather DMA mechanism that complies with the Programming Interface for Bus Master IDE Controller Revision 1.0, but also 2 IDE channels and up to 4 IDE device.<<less
complies with the Programming Interface for Bus Master IDE Controller Revision 1.0, but also 2 IDE channels and up to 4 IDE devicesLinksys LNE100Tx Version 2.0 Fast Ethernet PCI Car 2.0.2195.1
The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card more>>
- The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.
Gateway Flash BIOS for Older Vesa Bus Motherboards 9/95
This is the flash BIOS for older Vesa bus motherboards with a GLB-01 BIOS revision. Do not download this file if you have a JX-30 motherboard more>>
This is the flash BIOS for older Vesa bus motherboards with a GLB-01 BIOS revision. Do not download this file if you have a JX-30 motherboard. This BIOS will not enable logical block addressing for IDE drives having more than 1,023 cylinders (counting by the CHS cylinders, head and sectors per track).
Gateway Mailman and Hitman BIOS Update 1.00.07 DQ0T (1/97)
BIOS revision provides the system with increased INT13 functionality (relating to Bootable CDs and faster boot times), and APM v1.2 support. Includes FLASH Memory Update Utility Release 3.2 more>>
BIOS revision provides the system with increased INT13 functionality (relating to Bootable CDs and faster boot times), and APM v1.2 support. Includes FLASH Memory Update Utility Release 3.2. BIOS must end with DQ0T.
SiS 900 PCI Fast Ethernet Adapter 1.13.2.0
SiS 900 PCI Fast Ethernet Adapter: FEATURES: PCI specification revision 2.1 compliant. 32-bit glueless PCI host interface. Plug and Play compatible more>> SiS 900 PCI Fast Ethernet Adapter: FEATURES:
- PCI specification revision 2.1 compliant.
- 32-bit glueless PCI host interface.
- Plug and Play compatible.
- Supports PCI clock frequency from DC to 33 MHz independent of network clock.
- Supports network operation with PCI clock from 25Mhz to 33Mhz.
- Supports both +3.3v and +5v PCI signaling.
- High-performance 32-bit PCI bus master architecture with an integrated Direct.
Gateway Intel "Tigereye" Motherboards BIOS Updates 1.00.08.CY1T (1/97)
The BIOS revision 1.00.06.CY1T is the BIOS update for the Intel Tigereye motherboards, which include the following part numbers: MBDSAC032AxWW, MBDSAC033AxWW, MBDSAC035AxWW, MBDSAC036AxWW, and more>>
The BIOS revision 1.00.06.CY1T is the BIOS update for the Intel ""Tigereye"" motherboards, which include the following part numbers: MBDSAC032AxWW, MBDSAC033AxWW, MBDSAC035AxWW, MBDSAC036AxWW, and MBDSAC037AxWW. The 1.00.08.CY1T BIOS is released for increased INT13 functionality (relating to bootable CDs and faster boot times), added additional DMI support, implementation of APM version 1.2 support and ""Secure Flash."" This BIOS will work for the P5-100, P5-120, P5-133, P5-166, and P5-200 systems based on the ""Tigereye"" motherboards (CY1T series BIOS).
TEAC F/W Updater for DV-W50E 1.33A
This software (DV-W50E_FW130.EXE) is a utility that updates the firmware for the TEAC DV-W50E from firmware revision 1.10 to 1.30 Confirm that the firmware revision of your DV-W50E is 1.10 more>>
This software (DV-W50E_FW130.EXE) is a utility that updates the firmware for the TEAC DV-W50E from firmware revision 1.10 to 1.30 Confirm that the firmware revision of your DV-W50E is 1.10. Note that this program cannot be used for the DV-W50E with a firmware revision other than 1.10.
TEAC F/W Updater for CD-W552E 1.0 (5/12/2003)
This software is a utility that updates the firmware for the TEAC CD-W552E from firmware revision 1.05 to 1.09 Confirm that the firmware revision of your CD-W552E is 1.05 more>>
This software is a utility that updates the firmware for the TEAC CD-W552E from firmware revision 1.05 to 1.09 Confirm that the firmware revision of your CD-W552E is 1.05. Note that this program cannot be used for the CD-W552E with a firmware revision other than 1.05
TEAC F/W Updater for CD-W524E 1.2.0.0 (3/27/2003)
This software (UpdaterW524E.exe) is a utility that updates the firmware for the TEAC CD-W524E from firmware revision 1.0A/B/C/D to 1.0E more>>
This software (UpdaterW524E.exe) is a utility that updates the firmware for the TEAC CD-W524E from firmware revision 1.0A/B/C/D to 1.0E. Confirm that the firmware revision of your CD-W524E is 1.0A/B/C/D. Note that this program cannot be used for the CD-W524E with a firmware revision other than 1.0A/B/C/D.
TEAC F/W Updater for CD-W540E 1.0.1.0 (3/27/2003)
This program updates the firmware revision from 1.0A/B/C/D/F/H to 1.0K. Note that this program cannot be used for the CD-W540E with a firmware revision other than 1.0A/B/C/D/F/H more>>
This program updates the firmware revision from 1.0A/B/C/D/F/H to 1.0K. Note that this program cannot be used for the CD-W540E with a firmware revision other than 1.0A/B/C/D/F/H. The enhancements include: some of CD-R media write performance is to be improved; corrected the F/W to avoid an abnormal operation during drive start-up when a disc with illegal TOC information is loaded; and more.
PowerRIP 2000 6.11
iProof Systems PowerRIP 2000 and PressProof papers create professional contract proofs right on your inkjet printer. Graphic professionals and printers know the importance of accurate color proofs more>>
iProof Systems PowerRIP 2000 and PressProof papers create professional contract proofs right on your inkjet printer. Graphic professionals and printers know the importance of accurate color proofs. Color proofs are representative of what the press will print. With today's Mac's, PC's and digital presses old analog film proofing systems cannot do the job anymore. PowerRIP 2000 proofing system provides an accurate color contract proof that emulate the printing press. When combined with PowerRIP 2000 and PressProof papers or the manufacturers papers, you can select from several world standards including SWOP (the U.S. standard). PowerRIP 2000 is powerful yet user friendly. Designed to accommodate the single user or the entire office workgroup. As an open system, PowerRIP 2000 works with Apple ColorSync and PC ICC color systems, ICC profiles are included for all manufacturers paper types. PowerRIP 2000, a true software RIP is upgradeable online to the latest revision to add additional new printers or add a second platform. PowerRIP 2000 is available in both the Macintosh and PC platform. It will pay for itself in savings of materials and time. No longer do you have to pull film or wait on some alternative proofing method. PowerRIP 2000 is so affordable that both you and your clients can realize the benefits on proofing right on your desktop.
Linksys LNE100TX(v5) Fast Ethernet Adapter 2.10.402.2001
Linksys LNE100TX(v5) Fast Ethernet Adapter:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card more>> Linksys LNE100TX(v5) Fast Ethernet Adapter:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.<<less
Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4 2.10.1.2
Driver for Fast Ethernet Adapter more>> The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.<<less
- Page: 1 of 1
- 1
