php editor for mac os
Java Update for Mac OS X 10.3.9
This update will correct issues affecting some Java users following the installation of Mac OS X v10.3.9 Software Update more>>
This update will correct issues affecting some Java users following the installation of Mac OS X v10.3.9 Software Update. After updating to Mac OS X 10.3.9, some systems may have issues with Java applications and Java-enabled websites when using Safari. Safari may unexpectedly quit, and standalone Java applications may unexpectedly quit or not launch. This update resolves that issue.
Apple iBook Firmware 4.1.7
The iBook Firmware Update 4.1.7 will only run on iBook computers running Mac OS 9.1 from a local drive more>>
The iBook Firmware Update 4.1.7 will only run on iBook computers running Mac OS 9.1 from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 writeable partition (not a CD, or network disk) prior to following the update instructions. Firmware Update 4.1.7 includes improvements to Firewire target disk mode, network booting, gigabit networking (on systems with gigabit hardware), and system stability. This update also adds support for additional security options which allow the Open Firmware to be password protected. This update also contains changes from earlier Firmware Updates. This update adds support for 256 megabyte (MB) memory modules and improved support for using a USB storage device, such as an external hard drive, as a startup disk.
It appears most RAM vendors will replace RAM if you find yours has been disabled by this firmware.
Apple Mac OS Update 9.2.2
This is the latest Mac OS update from Apple that improves Classic application compatibility in Mac OS X and delivers updated support for Macintosh systems that are based on the PowerPC G3 or G4 more>>
This is the latest Mac OS update from Apple that improves Classic application compatibility in Mac OS X and delivers updated support for Macintosh systems that are based on the PowerPC G3 or G4 processor.
the Macintosh operating system for all computers that are compatible with Mac OS 9. Apple Mac OS ... the Macintosh operating system for all computers that are compatible with Mac OS 9. It providesMac OS 8.5.1 offers improvements to Drive Setup, fixes a memory leak in ... of many third-party ADB devices, and provides some improved Internet proxy firewalls forMac OS 8.1 offers faster Java performance and tighter integration with ... Mac OS 8.1 supports the new Extended Volume Format for hard disks (also known as HFS+), anis a maintenance release for Mac OS 7.6 users. This release corrects a variety of problems that ... is a maintenance release for Mac OS 7.6 users. This release corrects a variety of problems thatATI Universal Installer for Mac OS 4.2
This download will update your ATI video drivers. Supported: Nexus 128; Nexus GA; Rage Orion; Xclaim 3D Plus; Xclaim 3D; Xclaim GA; Xclaim VR; Xclaim VR 128; Xclaim TV; This installer will more>>
This download will update your ATI video drivers. Supported: Nexus 128; Nexus GA; Rage Orion; Xclaim 3D Plus; Xclaim 3D; Xclaim GA; Xclaim VR; Xclaim VR 128; Xclaim TV; This installer will automatically detect all active ATI "add-in" products in the system, and install the appropriate software. Not all components are installed for all products. "Built-in" ATI graphics controllers (i.e. those built into the main logic board for the system, or pre-installed by the system manufacturer) will NOT be detected by this installer.
Apple PowerBook Firmware 4.29
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive more>>
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 writeable partition (not a CD, or network disk) prior to following the update instructions. Firmware Update 4.2.9 includes improvements to Firewire target disk mode when running Mac OS X, and improves starting up on systems with 1gigabyte (GB) RAM and enables Netbooting over gigabit Ethernet.
It appears most RAM vendors will replace RAM if you find yours has been disabled by this firmware.
PPDs for QMS printers 1.0.0
This installer will place a PostScript Printer Description (PPD) file on your system and allow you to use your printer with Mac OS X version 10.0.3 or higher more>>
This installer will place a PostScript Printer Description (PPD) file on your system and allow you to use your printer with Mac OS X version 10.0.3 or higher. Mac OS X version 10.0.3 has very limited support for PPDs. Apple has assured Minolta-QMS and other printer manufacturers that they are working to improve PPD support in future versions of Mac OS X.
Apple PowerBook G4 Firmware 4.29
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive more>>
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 writeable partition (not a CD, or network disk) prior to following the update instructions. Firmware Update 4.2.9 includes improvements to Firewire target disk mode when running Mac OS X, and improves starting up on systems with 1gigabyte (GB) RAM and enables Netbooting over gigabit Ethernet.
Apple GeForce Graphics 2.1.1
The GeForce Graphics Card Update installs new graphics card firmware and Mac OS 9 system extensions to improve performance and compatibility more>>
The GeForce Graphics Card Update installs new graphics card firmware and Mac OS 9 system extensions to improve performance and compatibility. The new firmware also fixes a compatibility problem with newer versions of the NVIDIA system extensions.
The firmware on your graphics card will be updated only if an older version is detected. During the firmware update, your display will dim or go dark for 10 to 15 seconds, then reappear.
NEC-Mitsubishi Monitor Power patch 1.0.1
NEC-Mitsubishi has identified a compatibility issue between some models of display monitors and some Apple Macintosh G4 computers that causes the display monitor to remain off after a restart or more>>
NEC-Mitsubishi has identified a compatibility issue between some models of display monitors and some Apple Macintosh G4 computers that causes the display monitor to remain off after a restart or powering up after shutdown. On certain versions of the Mac OS ROM, this will only occur if the G4 has been in sleep mode. NEC-Mitsubishi has identified the cause as an incompatibility in the Mac G4s with OS 9.0.4 and Mac OS ROMs versions 4.9.1, 5.2.1 and 5.5.1, and Mac OS 9.1 Upgrade with Mac OS ROM 6.1. This causes "power off" commands to be sent to the monitor on shutdown and restart, however no matching "power on" command is sent instructing the monitor to wake up as the Mac powers up. The problem only appears on certain monitors because they support an optional industry standard alternate power command system that has been introduced on the new G4s. It is important to note that the monitor is functioning normally and is just following commands sent from the Mac. The following Mitsubishi monitors are affected by this issue:
- Diamond Pro 2045
- Diamond Plus 120
- Diamond Plus 200
- Diamond Plus 220
- Diamond Plus 730
- Diamond Pro 720
- Diamond Plus 710s
- Diamond Pro 920
- Diamond Plus 91
- Diamond Plus 92
Apple Bluetooth (Jaguar) 1.3.4
This version of the Bluetooth update is for Mac OS X 10.2.8. When you have a Bluetooth enabled Macintosh you can use Bluetooth technology to communicate wirelessly with devices such as mobile phones, more>>
This version of the Bluetooth update is for Mac OS X 10.2.8. When you have a Bluetooth enabled Macintosh you can use Bluetooth technology to communicate wirelessly with devices such as mobile phones, printers, keyboards, PDAs and more. Bluetooth 1.3.4 for Mac OS X 10.2.8 provides enhanced stability for Bluetooth connections to some Symbian OS mobile phones. This release does not contain any other new features.
Apple iMac Firmware 4.1.9
The iMac Firmware Update 4.1.9 will only run on iMac computers with slot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive more>>
The iMac Firmware Update 4.1.9 will only run on iMac computers with slot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions.
Kensington MouseWorks 2.4
MouseWorks for OS X is a driver for Kensington input devices running under Mac OS X. It provides enhanced acceleration, scrolling support, and configurability for Kensingtons current USB and ADB more>>
MouseWorks for OS X is a driver for Kensington input devices running under Mac OS X. It provides enhanced acceleration, scrolling support, and configurability for Kensington's current USB and ADB mice and trackballs, plus one-touch access to favorite Web pages and applications using the DirectLaunch buttons on Kensington's Turbo Mouse Pro trackball. The MouseWorks control panel, featuring a new Aqua interface, provides easy access to all settings.
MouseWorks for Mac OS X is a driver for Kensington input devices running under Mac OS X. It ... MouseWorks for Mac OS X is a driver for Kensington input devices running under Mac OS X. ItApple FireWire Drivers 2.5
FireWire 2.3.3 is a component of the Mac OS. The FireWire 2.3.3 software includes three system extensions: FireWire Support: This extension adds services to the Mac OS to support the use of FireWire more>>
FireWire 2.3.3 is a component of the Mac OS. The FireWire 2.3.3 software includes three system extensions:
- FireWire Support: This extension adds services to the Mac OS to support the use of FireWire hardware and software
- FireWire Enabler: This extension adds hardware-specific support for certain FireWire interfaces
- FireWire CardBus Enabler: This extension adds hardware-specific support for the Newer FireWire 2 Go CardBus interface, for use with PowerBook computers
Note: To use FireWire 2.5, you need a Macintosh computer with built-in FireWire ports, or at least one FireWire PCI card or CardBus card installed. To use FireWire 2.5 on a blue-and-white Power Macintosh G3, you should first install Mac OS 9 or the G3 Firmware Update 1.0.2 or 1.1. This software provides PCI performance adjustments that are necessary for maximum FireWire performance.
IomegaWare (Mac OS 8/9) 4.0.2 (10/28/2002)
IomegaWare provides integrated features that will help you find, format, protect, manage and change settings on your Iomega drives more>>
IomegaWare provides integrated features that will help you find, format, protect, manage and change settings on your Iomega drives. Support is included for Zip, Peerless, Jaz, USB PocketZip, FotoShow Digital Image Center, and HipZip products. These drivers make the drive visible within your operating system. Iomega CopyDisk replaces the default disk copy utility found in Windows and adds support for Iomega drives. Version 4.0.2 offers Iomega Zip 750MB Drive support.
G4 Cube Firmware Update 4.1.9
This firmware update includes improvements to starting up Mac OS X from the local hard disk, FireWire target disk mode, network start-up, and system stability more>>
This firmware update includes improvements to starting up Mac OS X from the local hard disk, FireWire target disk mode, network start-up, and system stability. This update also adds support for additional security options that allow the Open Firmware to be password-protected.
