order to
HP Color LaserJet 3.3
5/5M printing system more>> Important - The CLJ5FR feature is for the Color LaserJet 5/5M only. It will not work on the original HP Color LaserJet. If you have the HP Color LaserJet 5/5M please read the note below: Please Note: You do not need to upgrade your formatter board unless you will be using the CLJ5FR feature. (See driver list below) In order to use the CLJ5FR feature you must have the following: Your printer datecode must be version B.01.12 (960223) or above. To determine your firmware version, run a self-test page or look for the B sticker under your toner lid. Your PC must be 486/66 or above.<<less
Printer UnPICTifier 1.0
IMPORTANT NOTE: If you have wiped out the contents of the /var/spool/cups folder in order to get printing restored, you need to recreate the /var/spool/cups/tmp folder and give it the proper more>>
IMPORTANT NOTE: If you have wiped out the contents of the /var/spool/cups folder in order to get printing restored, you need to recreate the /var/spool/cups/tmp folder and give it the proper privileges as follows:
- sudo mkdir /var/spool/cups/tmp
- sudo chown daemon:admin /var/spool/cups/tmp
- sudo chmod 1700 /var/spool/cups/tmp
Disclaimer:
Since this software replaces the IPP backend that ships with Jaguar (the original is saved with a ".orig" extension so that the software can be uninstalled), it should only be installed if you have non-OS X print servers and you are attempting to print to them from an OS X machine using Internet Printing Protocol (IPP). It should work just as well as the original for OS X servers, but I make no guarantees.
Description:
This is a little hack I threw together out of annoyance. It addresses a problem with certain Carbon apps and a custom print filter in Jaguar's CUPS distribution (Panther corrects this problem). Specifically, certain Carbon apps, including Adobe Acrobat Reader, produce print jobs in a PICT-encoded Postscript format. On OS X machines, the custom pictwpstops filter converts the job to straight Postscript before the normal CUPS filters get ahold of it.
Because of the way CUPS works, that conversion is done on the server side for remote (shared) printers. As long as the server is running OS X, the job is accepted and prints. However, if the server does not run OS X, e.g. a Linux server, it doesn't know what to do with a PICT-encoded Postscript file, so it just rejects the request. On the OS X side, Print Center repeatedly attempts to send the job to the server without success. This causes the job to hang up in the local queue but, because the printer is remote, the job is not cancelable.
This software fixes that problem by pre-filtering PICT-encoded Postscript into straight Postscript (which is a format recognized by all IPP print servers) using Apple's custom filter before sending the print job to the server.
Epson Stylus Color II Driver Update 2.7AA
The current driver package update package is for use with the Epson Stylus Color II printer. After downloading the package you must copy the contents of both folders onto floppy disks to install the more>>
The current driver package update package is for use with the Epson Stylus Color II printer. After downloading the package you must copy the contents of both folders onto floppy disks to install the new drivers. The disks must be named ""Disk1"" and ""Disk2"" in order to work properly. The core driver version for this printer is 2.5.2.
Epson Stylus Color 500 Driver Update 2.7AA
The current driver package update package is for use with the Epson Stylus Color 500 printer. After downloading the package you must copy the contents of both folders onto floppy disks to install the more>>
The current driver package update package is for use with the Epson Stylus Color 500 printer. After downloading the package you must copy the contents of both folders onto floppy disks to install the new drivers. The disks must be named ""Disk1"" and ""Disk2"" in order to work properly. The core driver version for this printer is 2.5.2.
QuickCam Updater 2.1.2
This minor maintenance release of the QuickCam software increases compatibility with PowerBook 1400, 2400, and 3400 models. It also supports USB machines, allowing compatibility with the new iMac more>>
This minor maintenance release of the QuickCam software increases compatibility with PowerBook 1400, 2400, and 3400 models. It also supports USB machines, allowing compatibility with the new iMac. This update supports the Greyscale QuickCam, Color QuickCam, and QuickCam VC. You must be running version 2.1 or later of the Color QuickCam software in order to run this updater.
Epson Stylus 1500 Driver Update 2.7AA
The current driver package update package is for use with the Epson Stylus 1500 printer. After downloading the package you must copy the contents of both folders onto floppy disks to install the new more>>
The current driver package update package is for use with the Epson Stylus 1500 printer. After downloading the package you must copy the contents of both folders onto floppy disks to install the new drivers. The disks must be named ""Disk1"" and ""Disk2"" in order to work properly. The core driver version for this printer is 2.5.2.
Logitech Color QuickCam 2 Drivers Update 2.1
Update Drivers for Logitech QuickCam 2 Camera more>> This file will update you to the latest version of QuickCam software for the Color QuickCam. You must have a previous version of QuickCam software installed in order for this installation to work<<less
Epson Internal Home Page Update 1.0
For Epson internal 10/100 BaseTx print servers more>> This file contains the file used to update the internal home page of certain Epson internal 10/100 BaseTx print servers. WinAssist version 3.2aE must be used in order to perform the home page update.<<less
NVIDIA GeForce 256 (Micron) 7.7.7.2
NVIDIA GeForce 256. With transform, lighting, setup, and rendering on a single GPU, the GeForce 256 delivers 15M polygons/second and 480M pixels/second of performance more>> NVIDIA GeForce 256. With transform, lighting, setup, and rendering on a single GPU, the GeForce 256 delivers 15M polygons/second and 480M pixels/second of performance. Truly revolutionary, its unique 256-bit rendering engine enabled an order of magnitude increase in visual complexity, and helped to set the stage for the future of realism in graphics.<<less
order of magnitude increase in visual complexity, and helped to set the stage for the future ofVIA V-RAID Driver 5.30c (06/19/2006)
Update your IDE or Serial ATA RAID Controller from VIA to the latest driver version. more>>
VIA V-RAID Driver is a combo driver for VIA VT6410 IDE RAID controller, discrete Serial ATA RAID controllers VT6420 and VT6421 and integrated Serial ATA RAID controllers VT8237 & VT8251. The VT8237 native Serial RAID solution enables users to benefit from the performance and data security benefits of a high-end RAID system, but without the normally complicated setup procedures. Users do, however, need to have a basic understanding of RAID and how it works in order to be able to choose the best set up for their requirements and in order to be able to understand the set up procedures.
Version 5.30c (06/19/2006) may include unspecified updates, enhancements, or bug fixes.
Nikon Coolpix 990 1.1
The Firmware Uploader Software for the E990 Ver.1.1 is a computer program, which will update the firmware in your COOLPIX 990 (E-990) more>>
The Firmware Uploader Software for the E990 Ver.1.1 is a computer program, which will update the firmware in your COOLPIX 990 (E-990). The firmware is a program, which runs inside the camera and controls its operation. By running the Uploader Software you will install the new firmware in the camera. The entire package (Uploader software and new firmware for the camera) is supplied in a single file, which is compressed for distribution over the Internet. Before executing a firmware update, you must de-compress the files back to their original format. - The process of transferring the new firmware from the computer to the camera is sometimes called Uploading. - The process of updating firmware is sometimes also called upgrading. If your camera is version 1.0 it is recommended that you update the firmware in your camera to 1.1 in order to benefit from improved operating performance.
QuickSoundSwitch 1.03
QuickSoundSwitch is a small system tray tool, which allows you to switch the default sound device with only one click more>>
QuickSoundSwitch is a small system tray tool, which allows you to switch the default sound device with only one click. It is useful for PCs with more than one soundcard (or for example soundcard + USB headset). A lot of Windows programs like games and media players are using the default Windows sound device. This utility saves you the trip to the Control Panel to change audio devices, but you still need to restart any audio programs you may have already opened in order for the switch to affect them. Version 1.03 may include unspecified updates, enhancements, or bug fixes.
Microsoft Windows 2000 Patch: RPC Server Service S Update
This update resolves the Malformed RPC Packet security vulnerability in Windows 2000 and is discussed in Microsoft Security Bulletin MS00-066 more>> This update resolves the "Malformed RPC Packet" security vulnerability in Windows 2000 and is discussed in Microsoft Security Bulletin MS00-066. Download now to prevent a malicious user from launching a Denial of Service attack via the Remote Procedure Call (RPC) client.
In order to exploit this vulnerability, a malicious RPC client must send a malformed RPC packet to a Windows 2000 server. On receiving the malformed RPC packet, the server stops responding to client requests.
This is a Denial of Service vulnerability which primarily affects Windows 2000 servers that are directly exposed on the Internet. A server behind a firewall that blocks ports 135-139 and 445 are not affected by this vulnerability.
RPC services and the functioning of the server can be restored after an attack by restarting the affected computer.
For more information about this vulnerability, read Microsoft Security Bulletin MS00-066.
<<lessSilverFast Ai (Nikon) LS2000 6.6.0r2
SilverFast Ai is high-end scan and imaging software from LaserSoft Imaging which is now available for the Nikon LS2000 for Macintosh more>>
SilverFast Ai is high-end scan and imaging software from LaserSoft Imaging which is now available for the Nikon LS2000 for Macintosh. SilverFast Ai combines an intuitive user interface with highest professionality. Beginners and professionals will appreciate the intelligent automatic functions as well as the possibility to manually adjust the image at any point. Since any operation can instantaneously be undone, the beginner can easily get aquainted with the software's interface. The professional user can adjust any operation via numerical input and can precisely monitor the results using a densitometer.
Main highlights are:
- Real-Time Correction on large Preview
- Auto-Adjust with Artificial Intelligence
- Selective Colour Correction
- Predictable Colour with CMYK Softproof
- ICC Colour Management support
- Unique Unsharp Masking and Focus Control
- SRD- Dust and Scratch Removal
- Advanced Selective Colour Correction
- ACR - Adpative Colour Restoration
- SC2G - Selective Colour to Grey
- GANE - Grain and Noise Elimination
- MidPip4 - Advanced Colour Cast Removal
- QuickTime Movie Tutorials
- Jaguar compatible
- Enhanced GANE (Grain&Noise Elimination)
- Integrated QuickTime Movie Tutorials
- STUDIO upgrade available for efficient Noise reduction and Dynamic Range increase
- Multi-Exposure stability (auto-alignment) further enhanced
- Auto Frame Detection - automatically creates frames for all images in the prescan
- NegaFix enhanced - automatically reduces colorcasts when scanning negatives
- New NegaFix Profiles allow for more detailed corrections.
- SilverFast Ai-HDR Gamma Optimization further synchronizes 48bit scanning between SilverFast Ai / Ai Studio and image editing with SilverFast HDR / HDR Studio.
- CMS: Ask the user for an automatic prescan when input color management has been switched on or off.
- Auto Frame Detection - automatically creates frames for all images in the prescan
- NegaFix enhanced - automatically reduces colorcasts when scanning negatives
- New NegaFix Profiles allow for more detailed corrections.
- SilverFast Ai-HDR Gamma Optimization further synchronizes 48bit scanning between SilverFast Ai / Ai Studio and image editing with SilverFast HDR / HDR Studio.
- Auto-Rotation and Manual Rotation
- Now Photoshop CS3 compatible
- New eciRGBv2 working space included in all SilverFast Ai/HDR/DCPro (Studio) versions
- Fully Automatic IT8-Calibration with Studio Version: Added a new feature that improves the IT8 calibration. The IT8 target will be recognized automatically and performs all steps until reporting success.
- Scan frame: Look of scan frame changed. Instead of cross-hairs for rotating half-arcs can be used now. Also active frame is blinking in order to be noticed easier.
- Nikon: Fixed an issue with embedded Kodachrome profiles when using HDR scan mode of SilverFast and opening the resulting image files in Photoshop without processing the images in SilverFast HDR/DCPro before.
Epson Stylus Color Pro/XL Update 2.5AA
The current driver package update package is for use with the Epson Stylus Color Pro or XL printers. After downloading the package you must copy the contents of both folders onto floppy disks to more>>
The current driver package update package is for use with the Epson Stylus Color Pro or XL printers. After downloading the package you must copy the contents of both folders onto floppy disks to install the new drivers. The disks must be named ""Disk1"" and ""Disk2"" in order to work properly. The core driver version for this printer is 2.5.2.
