normally
MathLib 1.1
MathLib is a PalmOS shared library which makes a complete set of IEEE-754 double-precision math functions available to other PalmPilot applications more>>
MathLib is a PalmOS shared library which makes a complete set of IEEE-754 double-precision math functions available to other PalmPilot applications. These functions include all the standard routines normally accessed by including ""math.h"" on other systems, including trigonometry (with inverse and hyperbolic), logarithms, exponentiation, and miscellaneous helper functions. The only standard routines I left out were the Bessel and Gamma functions, which had the poor taste to be both very large and very rarely used. These routines have been ported from the GCC 2.7.2.2 source code for libm.a (which was itself based on free code originally developed by Sun Microsystems, Inc.), so this library is free software covered by the GNU Library General Public License.
Supra Modem CCL 3.1
To use these files with OSX, you will need to move these files into the Modem Scripts folder, inside the Library folder, within the root directory of the hard drive. A restart is normally required more>>
To use these files with OSX, you will need to move these files into the Modem Scripts folder, inside the Library folder, within the root directory of the hard drive. A restart is normally required. Go to System Properties ->Network-> Modem , select the proper script / CCL for your hardware.
NEC-Mitsubishi Monitor Power patch 1.0.1
NEC-Mitsubishi has identified a compatibility issue between some models of display monitors and some Apple Macintosh G4 computers that causes the display monitor to remain off after a restart or more>>
NEC-Mitsubishi has identified a compatibility issue between some models of display monitors and some Apple Macintosh G4 computers that causes the display monitor to remain off after a restart or powering up after shutdown. On certain versions of the Mac OS ROM, this will only occur if the G4 has been in sleep mode. NEC-Mitsubishi has identified the cause as an incompatibility in the Mac G4s with OS 9.0.4 and Mac OS ROMs versions 4.9.1, 5.2.1 and 5.5.1, and Mac OS 9.1 Upgrade with Mac OS ROM 6.1. This causes "power off" commands to be sent to the monitor on shutdown and restart, however no matching "power on" command is sent instructing the monitor to wake up as the Mac powers up. The problem only appears on certain monitors because they support an optional industry standard alternate power command system that has been introduced on the new G4s. It is important to note that the monitor is functioning normally and is just following commands sent from the Mac. The following Mitsubishi monitors are affected by this issue:
- Diamond Pro 2045
- Diamond Plus 120
- Diamond Plus 200
- Diamond Plus 220
- Diamond Plus 730
- Diamond Pro 720
- Diamond Plus 710s
- Diamond Pro 920
- Diamond Plus 91
- Diamond Plus 92
Mikron Infrared M7800 series IR handheld camera 1.1.0.0
Mikron Infrared M7800 series IR handheld camera: The Mikron M7800 represents another milestone in innovative infrared Thermal Imaging more>> Mikron Infrared M7800 series IR handheld camera:
Linksys LNE100TX(v5) Fast Ethernet Adapter 2.10.402.2001
Linksys LNE100TX(v5) Fast Ethernet Adapter:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card more>> Linksys LNE100TX(v5) Fast Ethernet Adapter:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.<<less
Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4 2.10.1.2
Driver for Fast Ethernet Adapter more>> The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.<<less
Linksys LNE100Tx Version 2.0 Fast Ethernet PCI Car 2.0.2195.1
The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card more>>
- The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.
VIA V-RAID Driver 5.30c (06/19/2006)
Update your IDE or Serial ATA RAID Controller from VIA to the latest driver version. more>>
VIA V-RAID Driver is a combo driver for VIA VT6410 IDE RAID controller, discrete Serial ATA RAID controllers VT6420 and VT6421 and integrated Serial ATA RAID controllers VT8237 & VT8251. The VT8237 native Serial RAID solution enables users to benefit from the performance and data security benefits of a high-end RAID system, but without the normally complicated setup procedures. Users do, however, need to have a basic understanding of RAID and how it works in order to be able to choose the best set up for their requirements and in order to be able to understand the set up procedures.
Version 5.30c (06/19/2006) may include unspecified updates, enhancements, or bug fixes.
LNE100TX Fast Ethernet Adapter Version 1.0 4.56.16.0
LNE100TX Fast Ethernet Adapter Version 1.0:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card more>> LNE100TX Fast Ethernet Adapter Version 1.0:The EtherFast 10/100 LAN Card has undergone a few revisions and improvements over the years. There are currently four versions of the card. The version of the card you have depends on when you bought it. Since each card uses a different set of software, make sure you download the right drivers for your version of the card. To tell the cards apart, look at the CPU chip on your card. (Its normally the largest chip you can see). Some cards chip will have LINKSYS printed on it, some have PNIC printed on it, while others will read DIGITAL. A description and picture of each chip & card version is shown below, along with a link to the download file(s) youll need. The Manual for the LNE100TX card with Wake-On-Lan support is available for download (size 2.2MB). Note that each cards regular drivers are stored across two disks, and youll need to download both. Each disk is between 200 and 600KB in size.<<less
- Page: 1 of 1
- 1
