iphone apps
M730Vdriver apps 2003-04-04
This driver supports the following devices: Intel PCI to USB Enhanced Host Controller A1 NEC PCI to USB Enhanced Host Controller B0 NEC PCI to USB Enhanced Host Controller B1 USB 2.0 Root Hub USB HUB more>>
This driver supports the following devices:
- Intel PCI to USB Enhanced Host Controller A1
- NEC PCI to USB Enhanced Host Controller B0
- NEC PCI to USB Enhanced Host Controller B1
- USB 2.0 Root Hub
- USB HUB
- Intel PCI to USB Enhanced Host Controller
- PC Camera (Microphone) 302
- VM PC Camera
- CTX USB PC Camera
- USB Composite Device(Vimicro)
M730Vdriver apps.zip 2003-04-04
This driver release supports the following devices: Intel PCI to USB Enhanced Host Controller A1 NEC PCI to USB Enhanced Host Controller B0 NEC PCI to USB Enhanced Host Controller B1 USB 2.0 Root Hub more>> This driver release supports the following devices:
- Intel PCI to USB Enhanced Host Controller A1
- NEC PCI to USB Enhanced Host Controller B0
- NEC PCI to USB Enhanced Host Controller B1
- USB 2.0 Root Hub
- USB HUB
- Intel PCI to USB Enhanced Host Controller
- PC Camera (Microphone) 302
- VM PC Camera
- CTX USB PC Camera
- USB Composite Device(Vimicro)
Printer UnPICTifier 1.0
IMPORTANT NOTE: If you have wiped out the contents of the /var/spool/cups folder in order to get printing restored, you need to recreate the /var/spool/cups/tmp folder and give it the proper more>>
IMPORTANT NOTE: If you have wiped out the contents of the /var/spool/cups folder in order to get printing restored, you need to recreate the /var/spool/cups/tmp folder and give it the proper privileges as follows:
- sudo mkdir /var/spool/cups/tmp
- sudo chown daemon:admin /var/spool/cups/tmp
- sudo chmod 1700 /var/spool/cups/tmp
Disclaimer:
Since this software replaces the IPP backend that ships with Jaguar (the original is saved with a ".orig" extension so that the software can be uninstalled), it should only be installed if you have non-OS X print servers and you are attempting to print to them from an OS X machine using Internet Printing Protocol (IPP). It should work just as well as the original for OS X servers, but I make no guarantees.
Description:
This is a little hack I threw together out of annoyance. It addresses a problem with certain Carbon apps and a custom print filter in Jaguar's CUPS distribution (Panther corrects this problem). Specifically, certain Carbon apps, including Adobe Acrobat Reader, produce print jobs in a PICT-encoded Postscript format. On OS X machines, the custom pictwpstops filter converts the job to straight Postscript before the normal CUPS filters get ahold of it.
Because of the way CUPS works, that conversion is done on the server side for remote (shared) printers. As long as the server is running OS X, the job is accepted and prints. However, if the server does not run OS X, e.g. a Linux server, it doesn't know what to do with a PICT-encoded Postscript file, so it just rejects the request. On the OS X side, Print Center repeatedly attempts to send the job to the server without success. This causes the job to hang up in the local queue but, because the printer is remote, the job is not cancelable.
This software fixes that problem by pre-filtering PICT-encoded Postscript into straight Postscript (which is a format recognized by all IPP print servers) using Apple's custom filter before sending the print job to the server.
PDAT Shell 2.14
Customizable menu program for creating large applications written using the PDA Toolbox compiler. By dividing your application into separate sub-components (sub-applications), you can write larger more>>
Customizable menu program for creating large applications written using the PDA Toolbox compiler. By dividing your application into separate sub-components (sub-applications), you can write larger apps safer and faster. Even though your application might consist of separate pieces, your application has one single entry point (icon) in the Palm OS Launcher. Includes documentation and how-to guide. REQUIRES RsrcEdit.prc or some other resource editor.
SilverFast (Howtek) D4000/4500 6.6.0r1
SilverFast Ai is high-end scan and imaging software from LaserSoft Imaging. SilverFast Ai combines an intuitive user interface with highest professionality more>>
SilverFast Ai is high-end scan and imaging software from LaserSoft Imaging. SilverFast Ai combines an intuitive user interface with highest professionality. Beginners and professionals will appreciate the intelligent automatic functions as well as the possibility to manually adjust the image at any point. Since any operation can instantaneously be undone, the beginner can easily get aquainted with the software's interface. The professional user can adjust any operation via numerical input and can precisely monitor the results using a densitometer. Main highlights are:
- Real-Time Correction on large Preview
- Auto-Adjust with Artificial Intelligence
- Selective Colour Correction
- Predictable Colour with CMYK Softproof
- ICC Colour Management with IT8 Calibration
- Unique Unsharp Masking and Focus Control
- JobManager
- SRD- Dust and Scratch Removal
- Advanced Selective Colour Correction
- ACR - Adpative Colour Restoration
- SC2G - Selective Colour to Grey
- GANE - Grain and Noise Elimination
- MidPip4 - Advanced Colour Cast Removal
- STUDIO upgrade available for efficient Noise reduction and Dynamic Range increase available
- QuickTime Movie Tutorials
- CMS: Ask the user for an automatic prescan when input color management has been switched on or off.
- Auto Frame Detection - automatically creates frames for all images in the prescan
- NegaFix enhanced - automatically reduces colorcasts when scanning negatives
- New NegaFix Profiles allow for more detailed corrections.
- SilverFast Ai-HDR Gamma Optimization further synchronizes 48bit scanning between SilverFast Ai / Ai Studio and image editing with SilverFast HDR / HDR Studio.
- Auto-Rotation and Manual Rotation
- Now Photoshop CS3 compatible
- New eciRGBv2 working space included in all SilverFast Ai/HDR/DCPro (Studio) versions
- Fully Automatic IT8-Calibration: Added a new feature that improves the IT8 calibration. The IT8 target will be recognized automatically and performs all steps until reporting success.
- Scan frame: Look of scan frame changed. Instead of cross-hairs for rotating half-arcs can be used now. Also active frame is blinking in order to be noticed easier.
- BUGFIX Howtek: Banding issue with 16 bit scans - fixed.
- IMPROVEMENT: iSRD: iSRD now corrects even more image defects.
- BUGFIX: IT8 calibration: Corrected routines in IT8 calibration which formerly lead to trouble if the target had been placed mirrored on or into the scanner.
- iSRD: Improved prevention of possible artifacts occuring with use of iSRD with too high setting values.
- IMPROVEMENT: General: Changed the way the scan frames are shown in preview.
- Multi-Exposure: Improved reliability when aligning the scans.
- BUGFIX: Howtek: On Windows a "SCSI Adapter not found" error occured - fixed.
- General: Photoshop (or other apps using the SilverFast Photoshop plug-in version, incl. the SF_Launcher) could crash after a batch scan - fixed.
WinInizio PenSuite Network 2.1
Now also in English. WinInizio PenSuite Network is a large collection of many famous software products of any kind that have been optimized to run from a USB pen-drive more>>
Now also in English. WinInizio PenSuite Network is a large collection of many famous software products of any kind that have been optimized to run from a USB pen-drive. Many software developers have authorized to shrink their software with UPX and to transform them into no-install applications, so they can be stored and executed into an USB pen-drive. The WinInizio PenSuite Network includes many killer apps like AM Deadlink, Avant Browser, The Gimp, eMule and and Filezilla. Several applications for almost 91 MB of software that can be used on any PC without setup.
Version Network 2.1 features: a new and simple setup has been introduced; the PenSuite's extraction to the hard disk or pendrive is now completely guided.
SilverFast (Heidelberg) QuickStep 6.6.0r1
SilverFast Ai is high-end scan and imaging software from LaserSoft Imaging which is now available for the Heidelberg scanners for Macintosh more>>
SilverFast Ai is high-end scan and imaging software from LaserSoft Imaging which is now available for the Heidelberg scanners for Macintosh. SilverFast Ai combines an intuitive user interface with highest professionality. Beginners and professionals will appreciate the intelligent automatic functions as well as the possibility to manually adjust the image at any point. SilverFast Ai assures amazing quality especially with the STUDIO option which reduces noise and increases Dynamic Range.
Main highlights are:
- Real-Time Correction on large Preview
- Auto-Adjust with Artificial Intelligence
- Selective Colour Correction
- Predictable Colour with CMYK Softproof
- ICC Colour Management with IT8 Calibration
- Unique Unsharp Masking and Focus Control
- SRD- Dust and Scratch Removal
- SCC - Advanced Selective Colour Correction
- ACR - Adpative Colour Restoration
- SC2G - Selective Colour to Grey
- GANE - Grain and Noise Elimination
- MidPip4 - Advanced Colour Cast Removal
- STUDIO upgrade available for efficient Noise reduction and Dynamic Range increase available
- QuickTime Movie Tutorials
- CMS: Direct matching from input/scanner profile to monitor profile can now be used if no color working space has been selected.
- Auto Frame Detection - automatically creates frames for all images in the prescan
- NegaFix enhanced - automatically reduces colorcasts when scanning negatives
- New NegaFix Profiles allow for more detailed corrections.
- SilverFast Ai-HDR Gamma Optimization further synchronizes 48bit scanning between SilverFast Ai / Ai Studio and image editing with SilverFast HDR / HDR Studio.
- Auto-Rotation and Manual Rotation
- Now Photoshop CS3 compatible
- New eciRGBv2 working space included in all SilverFast Ai/HDR/DCPro (Studio) versions
- Fully Automatic IT8-Calibration: Added a new feature that improves the IT8 calibration. The IT8 target will be recognized automatically and performs all steps until reporting success.
- Scan frame: Look of scan frame changed. Instead of cross-hairs for rotating half-arcs can be used now. Also active frame is blinking in order to be noticed easier.
- IMPROVEMENT: iSRD: iSRD now corrects even more image defects.
- BUGFIX: IT8 calibration: Corrected routines in IT8 calibration which formerly lead to trouble if the target had been placed mirrored on or into the scanner.
- iSRD: Improved prevention of possible artifacts occuring with use of iSRD with too high setting values.
- IMPROVEMENT: General: Changed the way the scan frames are shown in preview.
- Multi-Exposure: Improved reliability when aligning the scans.
- BUGFIX: Howtek: On Windows a "SCSI Adapter not found" error occured - fixed.
- General: Photoshop (or other apps using the SilverFast Photoshop plug-in version, incl. the SF_Launcher) could crash after a batch scan - fixed.
- Page: 1 of 1
- 1
