firmware update for nokia e71
iMac Firmware Update 4.1.9
This update includes improvements to starting up Mac OS X from the local hard disk, Firewire target disk mode, starting up from the local hard disk, network start-up, and system stability more>>
This update includes improvements to starting up Mac OS X from the local hard disk, Firewire target disk mode, starting up from the local hard disk, network start-up, and system stability. This update also adds support for additional security options which allow the Open Firmware to be password protected.
The iMac Firmware Update 4.1.9 will only run on iMac computers with slot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD or network disk) prior to following the update instructions.
Apple G3 Firmware Update 1.1
The Power Macintosh G3 Firmware Update version 1.0.2 should be installed on all blue & white Power Macintosh G3 or Macintosh Server G3 systems more>>
The Power Macintosh G3 Firmware Update version 1.0.2 should be installed on all blue & white Power Macintosh G3 or Macintosh Server G3 systems. Features delivered with this update include improved performance of PCI devices including built-in FireWire ports, improved support of NetBooting, and minor improvements to Open Firmware for Mac OS X Server. Instructions are available in English, however, this updater will work on all worldwide systems.
Compaq Firmware Update 1.00a
Maxtor 10, 13.5, and 20Gb hard drive update more>> Creates a bootable Compaq Firmware Update diskette for updating the hard drive firmware on Maxtor 10, 13.5, and 20GB Hard Drives in the Deskpro and Workstation models listed below.
- Deskpro EN Series SFF 6300, 6300A, 6300C, 6333, 6333C, 6350, 6400, 6450, 6450+, 6500, C466/810, C500/810, C600 (SFF), Net PC 6300, Net PC 6400, P450+/810e, P500/810e, P533/810e, P550, P600, P600/810e, P600/820, P650, P667 (SFF), P667 (SFF-v), P667/810e, P667/820, P700, P733 (SFF), P733 (SFF-v), P733/820, P800 (SFF), P800 (SFF-v), P866 (SFF), P866 (SFF-v), P933 (SFF), P933 (SFF-v), C566 (SFF-na), P667 (SFF-na), P733 (SFF-na), P1.0GHz (SFF), P1.0GHz (SFF-v)
- Deskpro EC Series C466/810e, C500/810e, P500/810e, P533/810e, P550/810e
- Deskpro EC Slim C466, C533, C566, P500, P650, P733
- Deskpro EP Series 6266, 6266C, 6300, 6300A, 6333, 6333C, 6350, 6400, 6400C, 6450, 6450+, 6500, a/C466/810e, a/C500/810e, a/P500E/810e, a/P550E/810e, a/P600E/810e, a/P667E/810e, a/P733E/810e, C433/810, C466/810, C500/810, P450+/810e, P500/810e, P533/810e, P550, P600, P600/810e, P650, P667/810e, P700
- Deskpro SB Series 6266, 6300, 6333, 6350, 6400
Update for Workstation harddrives. Compaq Firmware Update - Compaq . Creates a bootable Compaq Firmware Update diskette for updating theG4 Cube Firmware Update 4.1.9
This firmware update includes improvements to starting up Mac OS X from the local hard disk, FireWire target disk mode, network start-up, and system stability more>>
This firmware update includes improvements to starting up Mac OS X from the local hard disk, FireWire target disk mode, network start-up, and system stability. This update also adds support for additional security options that allow the Open Firmware to be password-protected.
iMac Update 1.1
In response to initial customer and developer feedback, Apple has made improvements to its Universal Serial Bus (USB) software for iMac customers more>>
In response to initial customer and developer feedback, Apple has made improvements to its Universal Serial Bus (USB) software for iMac customers. The iMac Update 1.1 includes these improvements, which enhance the experience with many USB peripherals, as well as enhancements previously released in iMac Update 1.0. While Apple suggests that every iMac user install this update, it notes that only those using additional USB devices other than the Apple USB keyboard and Apple USB mouse included with the iMac are likely to notice the improvements after installation. This version improves the identification of USB devices during start-up and more.
Note: You must install the iMac Firmware Update before installing the iMac Update 1.1.
EMI 2|6 Firmware Loader Update
The EMI 2|6 Firmware Loader, as the name indicates, automatically loads the EMI 2|6 Firmware into the EMI 2|6 during startup of your computer more>>
The EMI 2|6 Firmware Loader, as the name indicates, automatically loads the EMI 2|6 Firmware into the EMI 2|6 during startup of your computer. The firmware will be kept in the EMI 2|6 as long as it is connected and powered.
Once the firmware is loaded, the EMI 2|6 is available under Mac OS X using Mac OS X's built-in USB Audio Driver. Open the control panel "System Preferences > Sound" to choose the EMI 2|6 as the main system output. All signals, e.g. from iTunes, will then be played back via Channel 1 and 2 of the EMI 2|6.
AirPort Extreme Firmware Update 5.4
This update contains new AirPort Extreme features including improved antenna output control, enhanced logging from your base station which is compatible with syslog, and several performance more>>
This update contains new AirPort Extreme features including improved antenna output control, enhanced logging from your base station which is compatible with syslog, and several performance improvements for WPA security implementations.
Apple Ultra2 SCSI Card Firmware Update 1.2
If your blue and white Power Macintosh G3 or Macintosh Server G3 came with a single channel Ultra2 low voltage differential (LVD) SCSI card, run this updater to install firmware on the card that will more>>
If your blue and white Power Macintosh G3 or Macintosh Server G3 came with a single channel Ultra2 low voltage differential (LVD) SCSI card, run this updater to install firmware on the card that will yield more stable system performance. The new firmware is necessary to correct occasional problems related to cable termination that can occur when internal and external hard disk drives are connected to the card. Version 1.2 features improved stability, bug fixes, and added support for Mac OS 8.6. This software consists of a self-mounting Disk Copy compressed image (SMI) file. Download this software to your hard drive and then double-click it to use it. You do not need Disk Copy to access SMI files.
LaCie DVD Update Tool 2.0
LaCie DVD Update Tool v1.4.1 is for d2 and Porsche 16x DVDÃ?â??Ã?±RW DL (Double Layer) with LightScribe drives with IDE DVD DVDRW8651 mechanism; DVD drive firmware LT25 adds more media support more>> <<less
TEAC F/W Updater for DV-W50E 1.33A
This software (DV-W50E_FW130.EXE) is a utility that updates the firmware for the TEAC DV-W50E from firmware revision 1.10 to 1.30 Confirm that the firmware revision of your DV-W50E is 1.10 more>>
This software (DV-W50E_FW130.EXE) is a utility that updates the firmware for the TEAC DV-W50E from firmware revision 1.10 to 1.30 Confirm that the firmware revision of your DV-W50E is 1.10. Note that this program cannot be used for the DV-W50E with a firmware revision other than 1.10.
Mitsumi CR-4802TU Firmware Update (Windows 98) 3
Available in this download is the latest firmware update for the Mitusmi CR-4802TU External CD-RW drive running under Windows 98. This file is for the external CR-4802TU only more>>
Available in this download is the latest firmware update for the Mitusmi CR-4802TU External CD-RW drive running under Windows 98. This file is for the external CR-4802TU only. Version 3 may include unspecified updates, enhancements, or bug fixes.
Plexwriter 8/20 Firmware Upgrade 1.08
Plextor, known for its CD-ROM and CD-R drives, has posted a firmware update for its Plexwriter 8/20. Improvements in version 1.06 of this firmware update include improved write and read performance more>>
Plextor, known for its CD-ROM and CD-R drives, has posted a firmware update for its Plexwriter 8/20. Improvements in version 1.06 of this firmware update include improved write and read performance of discs that are Mode 2 Form 2 format, such as VideoCD and PlayStation.
Mitsumi CR-485FTE Firmware Update Utility 6.1 (04/04/2003)
This is Firmware Update Utility for Mitsumi CR-485FTE Internal CD-RW Drive (F/W Ver. 7.0C) more>>
This is Firmware Update Utility for Mitsumi CR-485FTE Internal CD-RW Drive (F/W Ver. 7.0C). The update adds the CD-MRW (Mt.Rainer) function.
Global Village 56K PC Card Firmware Update 2.081
This software includes version 1.200 of K56flex firmware and version 2.081 of V.90 firmware for 56K PC Card modems more>>
This software includes version 1.200 of K56flex firmware and version 2.081 of V.90 firmware for 56K PC Card modems. It will allow you to update your modem's firmware and switch between V.90 and K56flex modes of operation. This updater should be used by owners of Global Village 56K PC Card Modem/Ethernet cards or modem-only cards. The firmware updater automatically checks that you have the correct modem hardware before updating the firmware.
Mitsumi CR-487XETE Firmware Update Utility 482W (3/17/2003)
This is Firmware Update Utility for Mitsumi CR-487XETE Internal CD-RW Drive (F/W Ver. 482W) more>>
This is Firmware Update Utility for Mitsumi CR-487XETE Internal CD-RW Drive (F/W Ver. 482W). Confirmed media added.
