apple powercd
Apple PowerCD Update 1.0.1
This collection of driver files is for use with the PowerCD CD-ROM drive, an older, portable CD-ROM drive manufactured by more>>
This collection of driver files is for use with the PowerCD CD-ROM drive, an older, portable CD-ROM drive manufactured by Apple.
Apple PowerBook 150 Update 1.0
This update file provides modem compatibility for using System 7.5 with the PowerBook 150, and also addresses a potential problem with third-party internal modems not powering off correctly after more>>
This update file provides modem compatibility for using System 7.5 with the PowerBook 150, and also addresses a potential problem with third-party internal modems not powering off correctly after use.
Apple CD-ROM 5.4
Version 5.0.4 of the Apple CD-ROM extension should only be used by DOS Compatibility Card owners having trouble mounting CDs on the DOS side more>>
Version 5.0.4 of the Apple CD-ROM extension should only be used by DOS Compatibility Card owners having trouble mounting CDs on the DOS side. If this is the case, you should replace any newer version of the Apple CD-ROM extension with this version. To replace the newer version, simply drag this extension onto the System Folder. Replace the exisiting file if asked to do so.
Apple PowerBook Firmware 4.29
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive more>>
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 writeable partition (not a CD, or network disk) prior to following the update instructions. Firmware Update 4.2.9 includes improvements to Firewire target disk mode when running Mac OS X, and improves starting up on systems with 1gigabyte (GB) RAM and enables Netbooting over gigabit Ethernet.
It appears most RAM vendors will replace RAM if you find yours has been disabled by this firmware.
Apple DVD Player 3.0.1
DVD Player update delivers improved performance and stability, as well as support for Blue and White Power Mac G3 and Power Mac G4 systems with PCI-based more>>
DVD Player update delivers improved performance and stability, as well as support for Blue and White Power Mac G3 and Power Mac G4 systems with PCI-based graphics.
Apple Epson Printer Drivers 2.1
Apple Epson Printer Drivers is very useful because it includes the latest Epson printing and scanning software for Snow Leopard. more>>
Apple Epson Printer Drivers 2.1 is very useful because it includes the latest Epson printing and scanning software for Snow Leopard.
Apple Duo Battery Patch 1.0
This update corrects a problem that could cause your Duo battery not to charge properly. In some cases, on Duo 210/230/250 machines the battery would fail to recharge if the Express modem was more>>
This update corrects a problem that could cause your Duo battery not to charge properly. In some cases, on Duo 210/230/250 machines the battery would fail to recharge if the Express modem was installed in the machine. This problem occurs only with the Duo Enabler 1.0 installed, so if you are using a later enabler version, there is no need for this patch.
Apple PowerBook 1400 ATA Update 1.0
PowerBook 1400 users should install this updated extension for greater compatibility with ATA PC flash cards. ATA PC flash cards are commonly used with digital cameras more>>
PowerBook 1400 users should install this updated extension for greater compatibility with ATA PC flash cards. ATA PC flash cards are commonly used with digital cameras. This update corrects an error that was in the original driver for the ATA PC flash cards. You need this update only if you are using a PowerBook 1400 computer and ATA PC cards.
Apple PowerBook Duo 2300c Update 1.0
This system extension ensures that the trackpad in your PowerBook 2300c works more>>
This system extension ensures that the trackpad in your PowerBook 2300c works correctly.
Apple PowerBook G4 Firmware 4.29
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive more>>
The PowerBook Firmware Update 4.2.9 will only run on 550MHz or 667MHz PowerBook G4 computers running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 writeable partition (not a CD, or network disk) prior to following the update instructions. Firmware Update 4.2.9 includes improvements to Firewire target disk mode when running Mac OS X, and improves starting up on systems with 1gigabyte (GB) RAM and enables Netbooting over gigabit Ethernet.
Apple XModem Tool 1.1
The XModem tool allows you to upload and download files with the X transfer protocol when you are using the Apple Modem more>>
The XModem tool allows you to upload and download files with the X transfer protocol when you are using the Apple Modem tool.
Apple Ultra2 SCSI card 1.2
If your (blue and white) Power Macintosh G3 or Macintosh Server G3 came with a single channel Ultra2 low voltage differential (LVD) SCSI card, run the 2940U2B v1.2 Flash Utility to install updated more>>
If your (blue and white) Power Macintosh G3 or Macintosh Server G3 came with a single channel Ultra2 low voltage differential (LVD) SCSI card, run the "2940U2B v1.2 Flash Utility" to install updated firmware on the card to increase performance and reduce compatibility issues when using large files.
Apple Slot Combo Drive 1.0
This update installs new firmware on PowerBook and Xserve combo drives. The update prevents combo drives from intermittently failing to eject discs more>>
This update installs new firmware on PowerBook and Xserve combo drives. The update prevents combo drives from intermittently failing to eject discs. It's recommended that you install this update to ensure that your combo drive avoids this problem.
Your drive may or may not need to have firmware updated; installing and running this update will tell you if updating is required.
Apple FireWire Drivers 2.5
FireWire 2.3.3 is a component of the Mac OS. The FireWire 2.3.3 software includes three system extensions: FireWire Support: This extension adds services to the Mac OS to support the use of FireWire more>>
FireWire 2.3.3 is a component of the Mac OS. The FireWire 2.3.3 software includes three system extensions:
- FireWire Support: This extension adds services to the Mac OS to support the use of FireWire hardware and software
- FireWire Enabler: This extension adds hardware-specific support for certain FireWire interfaces
- FireWire CardBus Enabler: This extension adds hardware-specific support for the Newer FireWire 2 Go CardBus interface, for use with PowerBook computers
Note: To use FireWire 2.5, you need a Macintosh computer with built-in FireWire ports, or at least one FireWire PCI card or CardBus card installed. To use FireWire 2.5 on a blue-and-white Power Macintosh G3, you should first install Mac OS 9 or the G3 Firmware Update 1.0.2 or 1.1. This software provides PCI performance adjustments that are necessary for maximum FireWire performance.
Apple Wireless Keyboard 2.0
Apple Wireless Keyboard will make you satisfied with its ability to help you take advantage of your 2009 aluminum Apple Wireless Keyboards special features. Mac OS X 10.5.8 is required before installing this update. more>>
Apple Wireless Keyboard 2.0 will make you satisfied with its ability to help you take advantage of your 2009 aluminum Apple Wireless Keyboard's special features. Mac OS X 10.5.8 is required before installing this update.
Note: For Mac OS X 10.6 users, the 2009 Aluminum Wireless Keyboard is included in the Mac OS X 10.6.2 update.
