3.6
HP 2500 8.3.6
Base firmware for hp2500 series printers more>> Firmware version 8.3.6 replaces the base firmware version 8.3.3 for the HP 2500 series printers. The improvements over the previous firmware are as follows : 1. Fixes to reduce the occurrence of acumen errors 23 and 24 (ACU_FAIL_TEMP_TOO_HIGH, ACU_FAIL_TEMP_TOO_LOW respectively). The lower threshold is now lowered by 5degC compared to FW8.3.3, the upper threshold increased by 5degC compared to FW8.3.3. 2. The firmware includes an improved algorithm to ensure a more robust printhead error messages. 3. Tray 1 media present LCD message now has localised equivalents.<<less
MV650i 5.0.3.6
MV650i: It also supports Camera Direct printing of still shots captured on memory cards. Requiring only a single proprietary cable connection between the camcorder and Canon Bubble Jet Printers, more>> MV650i: It also supports Camera Direct printing of still shots captured on memory cards. Requiring only a single proprietary cable connection between the camcorder and Canon Bubble Jet Printers, Camera Direct eliminates the need for a PC in the print process by enabling users to control print settings directly from the camcorders LCD screen.<<less
FlexColor 3.6.2
It is not necessary to upgrade to this version if your existing version works well. The 3200 dpi medium format support only applies to the Precision II scanner shipping prior to 12/99 more>>
It is not necessary to upgrade to this version if your existing version works well. The 3200 dpi medium format support only applies to the Precision II scanner shipping prior to 12/99. Do not attempt to re-callibrate your scanner to 3200 dpi if your scanner already has this optical underline in the ColorFlex resolution drop down menu. Additionally, the Precision 1 is NOT upgradeable to 3200 dpi. Any attempt to do so may damage your scanner's optical zooming system. When upgrading to this version from 1.8.x or earlier it is recommended that you install it in a new folder. Custom settings that were made with earlier versions should be dragged from the old Settings folder to the folder named User Defined located in the 1.9 settings folder. You should not run any newer and older version at any time on the same computer. Trash the ColorFlex preference file before starting the new software installation. Upgrade to OS 8.5 and ColorSync 2.6.1 is a must. Do not attemp to install this software on your system without meeting those requirement.
cp000119.exe [3.6]
This driver release supports the following devices: Adaptec SCSI Card 39160 - Ultra160 SCSI Adaptec SCSI Card 39160/3960D - Ultra160 SCSI Compaq 64-Bit/66MHz Dual Channel Wide Ultra3 SCSI Adapter more>> This driver release supports the following devices:
- Adaptec SCSI Card 39160 - Ultra160 SCSI
- Adaptec SCSI Card 39160/3960D - Ultra160 SCSI
- Compaq 64-Bit/66MHz Dual Channel Wide Ultra3 SCSI Adapter
- Adaptec SCSI Card 29160 - Ultra160 SCSI
- Adaptec SCSI Card 29160 Ultra160 SCSI
- Compaq 64-Bit/66MHz Wide Ultra3 SCSI Adapter
- Adaptec SCSI Card 29160N - Ultra160 SCSI
- Adaptec SCSI Card 29160LP Low Profile Ultra160 SCSI
- Adaptec SCSI Card 19160 - Ultra160 SCSI
- Adaptec AIC-7899 - Ultra160 SCSI
- Adaptec AIC-7892 - Ultra160 SCSI
cp000121.exe [3.6]
This driver release supports the following devices: Adaptec SCSI Card 39160 - Ultra160 SCSI Adaptec SCSI Card 39160/3960D - Ultra160 SCSI Compaq 64-Bit/66MHz Dual Channel Wide Ultra3 SCSI Adapter more>> This driver release supports the following devices:
- Adaptec SCSI Card 39160 - Ultra160 SCSI
- Adaptec SCSI Card 39160/3960D - Ultra160 SCSI
- Compaq 64-Bit/66MHz Dual Channel Wide Ultra3 SCSI Adapter
- Adaptec SCSI Card 29160 - Ultra160 SCSI
- Adaptec SCSI Card 29160 Ultra160 SCSI
- Compaq 64-Bit/66MHz Wide Ultra3 SCSI Adapter
- Adaptec SCSI Card 29160N - Ultra160 SCSI
- Adaptec SCSI Card 29160LP Low Profile Ultra160 SCSI
- Adaptec SCSI Card 19160 - Ultra160 SCSI
- Adaptec AIC-7899 - Ultra160 SCSI
- Adaptec AIC-7892 - Ultra160 SCSI
91pcl5e9.exe 3.6.0.0
This driver release supports the following devices: Minolta-QMS PagePro 9100 PCL5 PagePro 9100 PCL5 KONICA more>> This driver release supports the following devices:
- Minolta-QMS PagePro 9100 PCL5
- PagePro 9100 PCL5
- KONICA MINOLTA
sp36771.exe 67.3.6
This driver release supports the following devices: NVIDIA nForce Networking Controller NVIDIA Network Bus more>> This driver release supports the following devices:
- NVIDIA nForce Networking Controller
- NVIDIA Network Bus Enumerator
SP21265.exe 3.6.7.0
This driver release supports the following devices: Compaq WL100 11Mbps Wireless LAN PC Card SAMSUNG 11Mbps WLAN PC Card(5V) SAMSUNG 11Mbps WLAN PCI more>> This driver release supports the following devices:
- Compaq WL100 11Mbps Wireless LAN PC Card
- SAMSUNG 11Mbps WLAN PC Card(5V)
- SAMSUNG 11Mbps WLAN PCI Card
cp008384.exe 3.6.0.0
This driver supports the following devices: HP Remote Insight Lights-Out II Board HP Remote Insight Lights-Out II PCI more>>
This driver supports the following devices:
- HP Remote Insight Lights-Out II Board
- HP Remote Insight Lights-Out II PCI Device
cp008391.exe 3.6.0.0
This driver supports the following devices: HP Remote Insight Lights-Out II Board HP Remote Insight Lights-Out II PCI more>>
This driver supports the following devices:
- HP Remote Insight Lights-Out II Board
- HP Remote Insight Lights-Out II PCI Device
cp002705.exe 6.3.6.2
This driver release supports the following devices: Compaq NC6132 Gigabit Module Compaq NC6133 Gigabit Module Compaq NC6134 Gigabit NIC Compaq NC6136 Gigabit Server Adapter Compaq NC7131 Gigabit more>> This driver release supports the following devices:
- Compaq NC6132 Gigabit Module
- Compaq NC6133 Gigabit Module
- Compaq NC6134 Gigabit NIC
- Compaq NC6136 Gigabit Server Adapter
- Compaq NC7131 Gigabit Server Adapter
- Compaq NC7132 Gigabit Upgrade Module
cp003300.exe 6.3.6.30
This driver release supports the following devices: Compaq NC6132 Gigabit Module Compaq NC6133 Gigabit Module Compaq NC6134 Gigabit NIC Compaq NC6136 Gigabit Server Adapter Compaq NC7131 Gigabit more>> This driver release supports the following devices:
- Compaq NC6132 Gigabit Module
- Compaq NC6133 Gigabit Module
- Compaq NC6134 Gigabit NIC
- Compaq NC6136 Gigabit Server Adapter
- Compaq NC7131 Gigabit Server Adapter
- Compaq NC7132 Gigabit Upgrade Module
cp002878.exe 6.3.6.30
This driver release supports the following devices: Compaq NC6132 Gigabit Module Compaq NC6133 Gigabit Module Compaq NC6134 Gigabit NIC Compaq NC6136 Gigabit Server Adapter Compaq NC7131 Gigabit more>> This driver release supports the following devices:
- Compaq NC6132 Gigabit Module
- Compaq NC6133 Gigabit Module
- Compaq NC6134 Gigabit NIC
- Compaq NC6136 Gigabit Server Adapter
- Compaq NC7131 Gigabit Server Adapter
- Compaq NC7132 Gigabit Upgrade Module
Fujitsu MO Drive 2.3.6
This driver includes the MO device extension and MO Disk Formatterfor DynaMO 640SD, DynaMO 640SE and DynaMO 1300SD with MacOS 7.5.1 or more>>
This driver includes the MO device extension and MO Disk Formatterfor DynaMO 640SD, DynaMO 640SE and DynaMO 1300SD with MacOS 7.5.1 or later.