JMicro JMB36X RAID Controller 1.12.01.00

JMB366 is a single chip, one-lane PCI Express to two-port Serial ATA II and two-port PATAHostController. The JMB366 is designed to provide two-port SATA II and two-port PATA connectivity. TheJMB366 supports AHCI, Legacy IDE and RAID controller to increase system feasibility, includingNative Command Queuing (NCQ), Hot Plugging, ATAPI Device Supporting, Port Multiplier withCommand-based Switching Supporting, Programmable Output Swing Control to fit SATA II Gen2i andGen2m (External SATAConnection, eSATA). It features PCI Express bus and Serial ATA II interface toexpress high performance storage devices.
Features:
Compliant with Serial ATAAHCI (Advanced Host Controller Interface) Spec. Reversion 1.0
Compliant with Bus Master Programming interface for IDE ATA Controllers Revision 1.0
Compliant with PCI Express Base Spec. Revision 1.0a
Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 1.0a
Compliant with Serial ATA II: Extensions to Serial ATA 1.0a Revision 1.1
Compliant with Gen2i and Gen2m Serial ATA II: Electrical Spec. Revision 1.0Overall
Integrated 1-Lane PCI Express PHY and 2-port SATA II PHY
Integrated two PLL for both PCI Express bus and SATA II interface
Output swing control and Automatic impedance calibration for both PCI Express and SATA II PHY
Supports up to 64K Byte external Flash for BIOS expansion
Supports a slave SMBus interface (follow System Management Bus Specification Revision 1.1)
Fabricated 0.18um/3.3V UMC CMOS Standard Logic Process with 1.8V and 3.3V
Available in 128-pin LQFP package
Pin compatible with JMB365 (1-port SATA II & 2-port PATAHost Controller)PCI Express
Supports 1-Lane 2.5Gbps PCI Express bus
Internal native interface multiplexed to 2-port SATA II and 2-port PATA
All registers accessible in unified memory spaceSATA II/PATA
Supports 2-port 3.0Gbps SATAII interface
Supports two independent SATA II channels (separate logic and FIFO)