Benq DW1640 firmware bsgb

Performance
[DVD+R DL]
Data Transfer Rate /double layer write: 88.64 Mbit/sec (8X)
[DVD+R/+RW]
Data Transfer Rate /write: 177.28 Mbit/sec (16X)
Data Transfer Rate /rewrite: 88.64 Mbit/sec (8X)
[DVD-R/-RW]
Data Transfer Rate /write: 177.28 Mbit/sec (16X)
Data Transfer Rate /rewrite: 66.48 Mbit/sec (6X)
[DVDROM]
Data Transfer Rate /read: 177.28 Mbit/sec (16X, Max.)Access time: 120 ms
[CD]
Data Transfer Rate /write: 7200 KByte/sec (48X)
Data Transfer Rate /rewrite: 4800 KByte/sec (32X)
Data Transfer Rate /read: 7200 KByte/sec (48X, Max.)
Access time: 120 ms
Interface
E-IDE/ATAPI
Supported IDE mode
PIO mode 0/1/2/3/4
DMA mode 0/1/2
UDMA mode 0/1/2
Buffer Size
2 Mbytes
Writing Mode
[DVD+R/+RW]
DVD Data and Video
[CD-R/-RW]
Track-at-Once, Disc-at-Once, Multisession, Packet Writing (fixed & variable packet), CD Digital Audio, Direct-Over-Write on CD-RW, Test Write
Disc Size
[DVD] 120 mm disc
[CD] 80 and 120 mm discs
Disc Formats
[DVD]
DVD+R DL 8.5GB, DVD+R 4.7GB, DVD+RW 4.7GB, DVD-R 4.7GB (closed session), DVD-RW 4.7GB (closed session), DVD-Video, DVD-5, DVD-9, DVD-10, DVD-18
[CD]
CD-DA, CD-ROM XA (m1, m2f1/m2f2), CD-R, CD-RW, Bootable CD, Photo CD (single & multi-session), Video CD, Super Video CD, CD-Extra, Mixed-mode CD, CD-Text
Audio Performance
Signal-to-Noise ratio: 76 dB min.
Number of stereo channels: 2
Analog audio line output: 0.75 VRMS at 470 Ohm
Analog headphone output: 0.6 VRMS at 34 Ohm
CD sampling frequency: 44.1 KHz
Power Requirement
+5V± 5%, ripple: 100mVpp
+12V ± 10%, ripple: 200mVpp
Environment Conditions
Operating temperature:
5 0C~50 0C (410F~1220F) at humidity of 8-80% RH
Non-operating temperature:
-40 0C~60 0C (-40 0F~140 0F) at humidity: 5%~95% RH
Reliability Characteristics
MTBF: 125,000 POH (20%)
Non-recoverable read error < 1 block in 1012 bits (CD and DVD)
Physical Characteristics
Dimension: 146 X 42 X 178 mm (W x H x D)
Weight: 820 g
Firmware Update
Flash memory upgradeable
Panel Design
Front side:
open/close button and read/write status indicator LED
Rear side:
40-pin ATA-2 dual row flat-cable connector, 4-pin DC power connector, 3-position device jumpers, digital audio output and analog audio output
OS Compatibility
Windows XP, 2000, ME, 98SE
Minimum System Requirements
IBM PC compatible
Pentium III 550MHz CPU
128MB DRAM
100MB free HDD space for CD/DVD recording related software installation
1GB free HDD space for CD Image recording (10GB for DVD authoring) is recommended.