DTK DEFT-845 BIOS 1.03

Specification
# Hardware: CPU: Support Socket 478 for Intel Pentium 4/ Celeron processor up to 3.0/3.06GHz and higher speed
# 400/533MHz Intel NetBurst micro-architecture bus
# Hyper-Threading Technology supported
# Core Logic: Intel 845GV+ICH4 chipsets
# Main Memory: Two 184-pin DIMM sockets
# Support DDR200/266/333 SDRAM up to 2GB
# VGA: Integrated Graphics controller in 845GE GMCH, support DVI
# Support 3D/2D enhancements
# 845GE can access graphics data located in system memory at 2.2 GB/s (DDR266) or 2.7GB/s (DDR333)
# Support extend AGP4X slot
# USB 2.0: Integrated USB 2.0 controller in ICH4
# Compliant with USB 2.0 specification
# Support Hi-speed, Full-speed and Low-speed data transfer rate. Max. Bandwidth 480Mbits/s
# Ethernet: Realtek RTL8100B 10/100Base-T Ethernet controller
# Full-Duplex supported, WFM 2.0 compliant
# 1394: Agere FW323-05 1394a Host controller
# Compliant with IEEE 1394 OHCI Spec. Rev. 1.1
# Data transfer rate can be 100/200/400Mbps
# Audio: AC-Link with AC’97 2.2 compliant
# Software audio with Realtek ALC650 Rev. E 6-channel AC’97 codec, S/PDIF Output/Input supported
# I/O Interface: Winbond W83627HF LPC controller
# Two enhanced PCI IDE channels which support up to 4 IDE devices with ATA-100 transfers up to 100MB/sec
# Build in FDC supports 1.2M/1.44M/2.88M FDD
# Back Panel I/O Output: Power switch
# S/PDIF-OUT optical connector
# 2*USB 2.0 connectors, 1 RJ-45 LAN port
# 2*1394 vertical connectors
# 1*fast serial ports, 1*D-type 15-pin VGA connector
# Line-in, MIC-in, Speaker-out
# PS/2 mouse and keyboard connectors
# Front Panel I/O Output Board: Power button, Reset button
# 2*USB connectors, 1*1394 connector
# S/PDIF-IN optical connector
# Center/Bass, Rear-Out, Line-out, MIC-in
# System BIOS: Award BIOS with 2MB/4MB EEPROM
# ACPI/PnP supported
# Mother board Form Factor: Self-defined @ 262 mm (L) × 180 mm (W), 6Layers
# Expansion Slots: 1*PCI slot, 1*AGP4X slot
# Drive Bays: 1*3.5” standard FDD drive
# 1*3.5” standard HDD drive
# 1*5.25” standard CD-ROM drive
# ADD Card (Optional accessory): Chrontel CH7010 DVI Transmitter + TV Encoder ADD card
# TV-out supporting up to 1024x768 resolutions
# 1*S-out, 1*Composite and 1*DVI connector on the Bracket
# Power Supply: 220W Low-profile ATX power supply